Front Panel Description - Krell Industries KPS 28c Instructions For Use Manual

Front Panel Description

See Figure 1 on page 6
The front panel of the KPS 28c accesses power
on and off and compact disc functions. The
compact disc display shows compact disc play-
back and programming status. Front panel fea-
tures and their descriptions follow.
Compact Disc Transport Functions
1 Compact Disc Transport
The compact disc transport holds the compact
disc.
2 Open/Close Button
Use this button to open and close the compact
disc transport.
Power
3 Stand-by LED
The red stand-by LED illuminates when the
KPS 28c is in the stand-by mode.
4 Power Button
Use this button to switch the KPS 28c between
the stand-by and the operational modes.
5 Power LED
The blue power LED illuminates when the KPS
28c is in the operational mode and flashes
when remote control signals are received.
Krell KPS 28c
Compact Disc Functions
6 HDCD LED
®
The red HDCD LED illuminates when a High
®
Definition Compatible Digital
indicating that HDCD
7 Compact Disc Display
The compact disc display shows compact disc
playback and programming status.
8 Track Forward Button
Use this button to select and begin playing the
track that follows the current track.
9 Track Back Button
Use this button to select and begin playing the
track that precedes the current track.
10 Pause Button and LED
Use this button to temporarily suspend play-
back of the current compact disc track. To
resume playing the track at the point pause was
engaged, press pause again or press the play
button (12) or key (29). The red pause LED illu-
minates when pause is engaged.
11 Stop Button
Use this button to end compact disc playback.
12 Play Button
Use this button to activate playback from the
beginning of the compact disc, to resume play-
back after pause, or to start playing a pro-
grammed sequence. For more information, see
Operating Your KPS 28c, on page 14.
disc is playing,
®
decoding is functioning.
®
7