TP-Link M7350 User Manual page 14

Internet connection
Data Roaming
Wi-Fi connection
Battery
Download speed
Upload speed
Data statistics

Note:
When you leave alone the buttons on the device, the screen will light on for 15 seconds and
then turn off. Pressing the power button will light up or turn off the screen.
Power Button: When the Device is successfully installed, press this button until the screen

appears
this button until the screen appears "Power off".
Micro USB Port: It's for you to connect the Device with the power adapter (attached in the

package) via the USB cable.
RESET Button (hole): It's the button to restore the Device to its factory defaults. With the

Device powered on, use a pin to press and hold the RESET button (hole) for about 5
seconds, until the screen displays "Power Off"; then release the button and wait the Device
to reboot and restore its factory default settings.
Indicates the successful network connection.
Indicates you are in roaming service.
Displays the Wi-Fi status and the amount of current
wireless clients.
Indicates that there is un-read short message(s) and the
SMS
amount of un-read messages.
Displays the remaining battery power.
Indicates the download speed of current data transmission.
Indicates the upload speed of current data transmission.
Indicates the data used in total. The data statistics will be
cleared after resetting the Device.
Table 1-1 The screen details
to turn on the Device, and if you want to turn it off, please press
M7350 LTE-Advanced Mobile WiFi User Guide
-4-