TP-Link M7350 Quick Installation Manual

Quick
Installation Guide
LTE-Advanced Mobile Wi-Fi
MODEL NO. M7350
Connecting to the Internet
1
Install the SIM card and battery
Open the cover upwards, and install the SIM card and battery as shown.
Step 1:
Step 3:
a
b
*
SIM card not provided by TP-LINK.
*
Micro or Nano SIM cards should be converted using provided SIM card trays.
2
Turn on the M7350
Hold the button until the screen appears as shown below.
(You can also hold the button until the screen appears "Power off" to turn
off the M7350.)
*Advanced configuration
For advanced configuration, please enter the web-management page：
Open your web browser and type http://tplinkmifi.net or http://192.168.0.1 into the
address bar, then enter the default user name and password: admin, and click Login.
FAQ(Frequently Asked Questions)
FAQ1. What should I do if I cannot log into the web-management page?
Verify that your device is connecting to the M7350.
Verify that you entered the correct IP address http://tplinkmifi.net or http://192.168.0.1.
Verify that your device is obtaining an IP address automatically.
FAQ2. What should I do if I cannot access the Internet?
Tip1. Check the LAN connection
Open your web browser and type http://tplinkmifi.net or http://192.168.0.1 in the address bar,
Check if you can log into the web-management page successfully. If not, please refer to FAQ 1
and retry.
Tip2. Check your ISP parameters
1. On your phone, log into the web-management page , choose "Dial-up -> View profile details" to
verify the parameters are correct with your ISP. These parameters include APN, User name and
Password.
2. If these settings are not correct, please return to Dial-up page and click Create to create a new profile
with the correct parameters, and then choose the new profile from the Profile List.
Tip3. Check the Data Roaming
1. Please confirm on the screen if you are in roaming service. If roaming, the
on the screen.
Step 2:
* Make sure you have
the triangle notch
outwards.
Step 4:
icon will appear
R
3
Connecting to the Internet
When turned on, the M7350 will boot for a while. You will then see one of
the following messages. Please follow the corresponding instructions.
4G 85%
0.0KB/S 0.00KB
Establish a Wireless Connection
Search for the wireless network name (SSID) and type in the wireless password ,
both of which can be found on the screen or rear cover label.
To check the SSID and Password on the screen:
1. Press the MENU button to display the menu.
2. Press the MENU button to scroll to Device Info.
3. Press the button to enter Device Info.
*We suggest changing the wireless network name and password on the
web-management page for your own security.
Enter the PIN Code
1. Open your web browser and type http://tplinkmifi.net
or http://192.168.0.1 in the address bar, then enter the
Enjoy! default user name and password: admin, and click Login.
2. Enter the correct PIN code according to your ISP, and
click Done.
Note: 1. If "No Service" appears on your screen, please verify the following
and repeat step
3
Verify that your SIM card is an LTE , WCDMA or GSM SIM card.
Verify that your SIM card is in your ISP's service area.
Verify that your SIM card has sufficient credit.
2. If "No SIM Card" appears on your screen, please turn off the
M7350 and repeat steps
2. On your phone, log into the web-management page, choose "Dial-up", and then enable the Data
Roaming.
Note: You can also enable the Data Roaming on the screen.
Tip4. Check the Mobile Data
1. On your phone, log into the web-management page, choose "Dial-up" to verify that Mobile Data is on.
2. If the Mobile Data is off, enable it to access the Internet.
Tip5. Check the Data Limit
1. On your phone, log into the web-management page, choose "Device->Data Settings" to verify if the
Total/Monthly Used has exceeded the Total/Monthly Allowance.
2. If it is, click Correct and set Total/Monthly Used to zero. You can also turn off the Data Limit to access
the Internet again.
FAQ3. What should I do if my Internet speed is slow?
1. The 4G network may be in poor condition. Press the MENU button to scroll to Network Mode,
press the button and try another mode.
2. The 2.4GHz Wi- Fi network may be interfered. Recommend using the 5GHz Wi-Fi network if
your devices support it. Press the MENU button to scroll to Wi-Fi 2.4G/5G, press the
and choose the 5GHz Wi-Fi band.
©2015 TP-LINK
PIN Required
0.0KB/S
back
SSID:
TP-LINK_9508
Password:
21049508
Login Name:
http://tplinkmifi.net
.
1 ~ 3 .
85%
0.00KB
button