Care Of Your Mapcreate Cds; Starting Mapcreate - Lowrance MapCreate 6 Installation And Operation Instructions Manual

restart your computer now. MapCreate and the card reader will not run
until your computer restarts.
With the "restart my computer now" option selected, click . After
F
INISH
the computer restarts and Windows has finished loading, plug the card
reader into a USB port. After Windows finishes installing the card
reader, it will appear as an additional drive letter in My Computer. The
card reader and MapCreate are ready to use. If you are running an anti
virus program on your computer, be sure to turn it back on at this time.

Care of your MapCreate CDs

Protect the shiny recorded surface of the compact discs from scratches,
fingerprints and dirt. Hold a disc along the outer edge or by the center
hole. Clean a dirty disc with a soft, dry cloth. You can also use a com-
mercial CD cleaner or ethyl alcohol to remove fingerprints and dirt. Do
not leave your discs in direct sunlight or in a hot, humid location.

Starting MapCreate

To start MapCreate, make sure one of the MapCreate CDs is in your
CD-ROM drive. Click the Windows button, then click on the
S
TART
MapCreate shortcut in the program menu. (A disc must be in the drive
each time you start the program.)
Click the Windows Start button, All Programs, LEI, and then
your MapCreate version. (This is the default location for the shortcut).
If you prefer, you can start MapCreate using the alternate methods de-
scribed below.
To start MapCreate from Windows Explorer:
Open Windows Explorer, if it is not already running. Navigate to the
folder in which MapCreate is installed. By default the path is:
28