Inserting And Removing The Card (Optional)/The Battery; Picture Save Destination (Cards And Built-In Memory) - Panasonic Lumix DMC-TZ10 Basic Operating Instructions Manual

Inserting and removing the card
(optional)/the battery
Set the camera ON/OFF switch
to OFF and slide the release
lever ( A ) to [OPEN] before
opening the lid
Completely insert battery and
card
• Battery: Push in until the lever is locked
• Memory card: Push in until it clicks
Do not touch terminal
B
Check orientation
C
Close lid
Slide to the [LOCK] position.
■
To remove
• To remove battery:
move lever in direction of arrow.
Lever
●
Always use genuine Panasonic batteries (DMW-BCG10E).
●
If you use other batteries, we cannot guarantee the quality of this
product.
●
The card may be damaged if it is not fully inserted.
12
VQT2L73 (ENG)
A
[OPEN] [LOCK]
B
C
• To remove card:
press down in centre.

Picture save destination (cards and built-in memory)

■
Built-in memory (approx. 15 MB)
●
The built-in memory can be used as a temporary storage device when the
card being used becomes full.
●
The access time for the built-in memory may be longer than the access time
for a card.
■
Compatible memory cards (optional)
The following SD standard-based cards
(Panasonic brand recommended)
Type of Card Capacity
SD memory 8 MB – 2 GB • Can be used with devices
cards
SDHC memory 4 GB – 32 GB
• Before using SDXC memory
cards
SDXC memory 48 GB – 64 GB
cards
• Cards in capacities not listed
●
If the write-protect switch is set to 'LOCK', the card cannot be used to
record or delete pictures, and it cannot be formatted.
●
Latest information:
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
●
Keep the Memory Card out of reach of children to prevent swallowing.
Switch (LOCK)
Notes
compatible with the
respective formats.
cards, check that your
computer and other devices
support this type of card.
http://panasonic.net/avc/
sdcard/information/SDXC.
html
at left are not supported.
(ENG) VQT2L73
13