Main Board Block - Sony HT-CT180 Service Manual

2-4.

MAIN BOARD BLOCK

8 L-ch speaker cable connector
(XP10)
Bottom side
Left side
–
speaker wire
groove
FFC 22P (FFC2) groove
–
3 two screws
(3 8 S)
9 MAIN board block
4 Lift up the MAIN board
block in the direction
Top side
of the arrow.
Note: Please spread a sheet under a unit
not to injure front cabinet.
–
front side
Install the antenna wire
straight from the front side.
WIRELESS board
–
The FFC is goes around the parts.
–
7 antenna wire terminal
2 NFC cable
connector
(XP12)
1 FFC 10P (FFC1)
(XP20)
OK
The FFC goes in between the parts.
– FFC 10P (FFC1)
HT-CT180
5 FFC 22P (FFC2)
(XS1)
6 R-ch speaker cable connector
(XP11)
How to install the flexible flat cable
When installing the flexible flat cable,
ensure that the colored line is parallel
to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
NG
Insert at a slant.
flexible flat
cable
colored line
connector
speaker wire
groove
NG
– –
FFC 10P (FFC1)
Right side
9