Stand-Alone Test; General Description - LG KF750 Service Manual

11. Stand-alone Test

11. Stand-alone Test

11.1 General Description

1) General Description
This document describes the installation and software usage for the stand-alone test of LG's
GSM/GPRS/EDGE/WCDMA Mobile Phone. The test menu and it's result is displayed in PC terminal
by Mobile phone.
This test software was called "XCALMON(eXtended CALibration and MONitor program)". XCALMON
can support both calibration and test.
This test software includes GSM, DCS, PCS, EDGE, and WCDMA Band test.
2) XCALMON Environment
H/W Environment
- PC with RS-232 Interface & GPIB card installed
- GSM/GPRS/EDGE/WCDMA Mobile Set
- Agilent 8960 Series 10 E5515C Instrument (E1987A ver A.05.28)
- Tektronix PS2521G Power Supply or Agilent A66311B
- ETC (GPIB cable, Serial cable, RF cable, Power cable, Dummy battery)
S/W Environment
- National Instrument GPIB & VISA (ver 2.60 runtime) driver install
- Agilent 8960 VXI driver(E1960) install
- XCALMON EXE files
- OS : Window98, Window2000, WindowXP
- Serial port configuration
Baud rate: 115200 / Char length: 8bit / No Parity/ No Flow control / Stop bits: 1 bit
3) Configuration Diagram of Test Environment
LGE Internal Use Only
KF750
Copyright © 2008 LG Electronics. Inc. All right reserved.
- 226 -
Only for training and service purposes