Turning The Power On And Off; Using An External Stereo Microphone - Sanyo ICR-B160NX Instruction Manual

Using an external stereo microphone

Connect an external stereo microphone (not supplied) to
the MIC(ST) socket. The built-in microphones are
automatically disconnected.

Turning the power on and off

Press the i button. "HELLO" appears briefly
on the display and the power turns on.
- The m PAUSE/REC or FOLDER/REPEAT
button can also be used.
Then the last selected file number and total playing time
appear (Resume function).
Press the i button for at least 2 seconds. "-byE-"
appears and the power turns off.
Auto power off function
- Leaving the unit on for 15 minutes without using it
automatically turns off the power.
- Leaving the unit on with recording pause for more
than 15 minutes turns off the power after creating the
recorded file.
Resume function
By storing the point where you stopped last, it becomes
possible to start playback of the file from that point even
after turning off the power.
- The resume function is cleared if the folder is changed,
if the unit is connected to your PC or if the batteries
are removed.
GB-5
S Hi