Disassembly And Installation; Door And Handle; Lamp Switch; Wind Passage Cover Assembly And Lamp In Fridge - Haier HRF-660W/U Service Manual

SERVICE MANUAL
Model: HRF-660W/U
Chapter3 Disassembly and Installation

3.1. Door and handle

1. Loosen the screw by screwdriver, and then remove the
hinge cover from upper way.
2. Loosen the screw fixing the upper hinge to the body and
lift the door.
3. Door gasket can be pulled out from door foa m assembly .
4. Fix the bolt into the hole on the door, and then use the
handle aiming to the bolt, push the handled own until it
touch the door firmly.

3.2. Lamp Switch

1. To remove the switch pulls out it with a flat type
screwdriver as shown in.
2. Disconnect the lead wire from switch.
3.3. Wind passage cover assembly and lamp in fridge chamber
1. Unplug the power cord from the outlet;
2. Remove the fridge shelf;
3. Remove the lamp cover ;
4. The bulb can be replaced;

Issue 2010-09-30

Rev. Ref1009S031V1
9