Ip Setup; Connection Test; Clear All Parental Settings - Sharp Aquos LC-32LD171K Operation Manual

Lcd colour television
Table of Contents

Advertisement

E Information
Display information of network connection�
E IP Setup
• Address Type
Select Auto to detect IP automatically, or select Manual
to enter IP Address, Netmask, Gateway, Primary DNS,
and Secondary DNS�
* IP Address
* Netmask
* Gateway
* Primary DNS
* Secondary DNS
E Connection Test
Check if the TV connects to network successfully or
not�
OAD (Manual Software Download)
When you get the software updating news from the
retailer or internet, you can update the operation
software using the OAD (Over Air Download)� The
updated software data will be transferred through the
TV signal�
NOTE
• Please do not switch off the TV during the downloading
process�
Power Control
You can use this function to save energy�
E Audio Only
When set to "On", you can turn the screen off and
enjoy audio only�
E Power Saving
When set to "On", the TV will decrease the power
consumption and increase the backlight lifespan�
E No Operation To Sleep
Allows the TV to automatically enter standby mode
when there is no operation�
2 Hours / 4 Hours. Or select Off to disable this function�
NOTE
• 5 minutes before the TV enters standby mode, the
time is displayed every minute�
remaining
CEC Setup
This function enables you to control the HDMI-CEC
compliant device connected via the HDMI connector�
Location
Select Store or Home� Store mode is recommended
Select the time to 1 Hour /
for displaying in a retail showroom, and Home mode
is recommended for normal home using for energy
saving�
Input Labels
You can label each input source (except USB) with a
custom description�
Icon Light Up Setting
When set to "On", the LED on the front of the TV turns
on�
Version Info
Displays the Software information�
Reset
When you activate the Reset, the TV enters to first
time installation�
Parental
Lock TV channels or connected devices with a
four-digit code to prevent children from watching
unauthorized content�
You have to enter a 4-digit password every time to
access Parental menu�
Enter "5351" as the default password�
CH Block
Lock TV channels to prevent children from watching
certain channels�
NOTE
• If you switch to the locked channel, you will be
prompted to enter your password� (If your password is
correct, the locked channel will be unlocked before the
TV restarts from standby�)
Age Rating
Some digital broadcasters rate their programmes
according to age� You can set TV to display only
programmes with age ratings higher than your child's�
Change password
Enter your new password in the New Password box
by using the digit buttons on the remote control�
Then, enter your new password again in the Confirm
Password box�

Clear all parental settings

Reset all the settings in the Parental menu�
TV menu
- 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents