What To Do, If - Loewe TV 23332507.020 Operating Instructions Manual

What to do, if ...

Problem
The "Recording" menu point is not displayed in the
TV menu.
"Connections" cannot be called in the TV menu
(deactivated)
The control of the Loewe video recorder and the
timer do not work or do not work properly.
General problems with connecting external
equipment via an AV input.
A decoder connection does not function or is faulty. a) The signal is not decoded because the wrong
All menus appear in the wrong language.
- 40
Possible cause
No video or DVD recorder logged in.
A time recording is in progress.
a) The Digital Link function is not activated or not
possible in the recorder.
b) Euro-AV cable is not connected.
c) Recorder is not logged in.
a) The device is not logged in to the connection
wizard or is connected differently than is shown
in the connection diagram.
b) The AV norm is set incorrectly.
c) The AV signal is set incorrectly.
decoder stations are selected in the connection
wizard.
b) The sound is missing in decoder mode because
the wrong decoder sound is assigned in the
connection wizard.
Menu language has been set incorrectly.
Remedy
Log in the video or DVD recorder in the connection
wizard and connect the device.
Wait until the timer recording has ended or delete the
timer.
a) Activate Digital Link in the recorder (see operating
instructions of the video recorder).
b) Connect the Euro-AV cable.
c) Log in recorder.
a) In the connection wizard (TV menu –
Connections – New devices/modifi cations),
compare the connection diagram with the actual
installation and connect as shown, if necessary.
b) Set the norm correctly.
c) Set the AV signal correctly.
If "Automatic" is set for AV norm or AV signal, this
can lead to errors for signals which do not conform
to the norm. Then the norm and the signal are to be
set according to the specifi cations in the operating
instructions of the external device.
a) Follow the instructions in the connection wizard
again (TV menu – Connections – New devices/
modifi cations) and select the corresponding
decoder station.
b) Follow the instructions in the connection wizard
again and select the right audio source (decoder,
TV or autom.), see instructions of the decoder.
Set your menu language:
Press the INFO button in TV mode (index). Select the
fi rst index item and call it by using OK. Then select
the language and confi rm with OK.