Manual Setting Of Tv Programmes - Loewe Mimo 15 SAT Operating Instructions Manual

Manual setting of TV programmes

Mode 2/sound 2:
This function allows a second sound channel to
be set. For example, for "Sound 1" you can
select one language and for "Sound 2" you can
set another language, if these are transmitted
by the channel.
Sound carrier
Mode 1 M110
Sound 1 7.02
Mode 2 M110 M280 M400 ...
Sound 2 7.20
O K
Store
• Select the "Mode 2" line and set, for
example, M280 for mono sound on
EUTELSAT channels.
• For another language select the "Sound 2"
line and select the corresponding carrier
frequency, e.g. 7.57 MHz.
Set video parameters
If you receive transmissions from another
country or encrypted programmes with a Pay
TV decoder, you may have to adjust the
corresponding video parameters for good
picture quality.
Manual adjustment
Other ...
Sat ASTRA Hotbird
Sound carrier
Video parameters
O K
Store
• Select the "Video parameters" line.
• Confirm with the OK button.
LCD_SAT_31715022_GB
– "Amplitude"; is normally set to "Amplitu-
de Autom.". For encrypted programmes
another amplitude value may have to be
set, e.g. 4.
– "Baseband"; normally "Baseband off"
should be selected. Some Pay TV decoders
require the baseband signal for decoding
Pay TV channels; in this case, select
"Baseband on".
– "Polarity"; programmes can be
Back
M
transmitted by satellites with negative or
E End
positive polarity. If the polarity is set
incorrectly, the picture is displayed
negatively, or it flickers!
Colour standard:
If no colour picture is displayed, the
appropriate colour standard PAL, SECAM or
NTSC must be selected.
M Back
OK
End
E
29
Press the MENU button to
return to the "Manual setting"
menu.
Manual adjustment
Other ...
Sat ASTRA Hotbird
Sound carrier
Video parameters
O K Back
M
Store E End
Select "Other " and then the
"Colour standard "line.
10.08.2004, 15:44 Uhr
Manual adjustment
Range Sat/V
Frequency 11258 MHz
Name EUROSPRT
Col. st. Autom. PAL SECAM ...
other ...
Accept
with OK
O K M
Store
E
Normally you would select
"Automatic ".
OK
If, however, you want to search
for only one channel using the
SECAM for NTSC colour
standard, then select the
appropriate standard.
Save settings:
Press the red button.
The programme overview
appears. The programme or a
programme number is
highlighted in blue.
You can save in two ways:
1. If you have changed settings for a
programme that is already stored, then
"Overwrite " the old settings by pressing
the red button.
2. Press the yellow button to "insert "the
programme into the programme list.
Close programme overview.
Back
End
29