Enabling And Disabling Parksense; Service The Parksense Rear Park Assist System - Dodge 2016 Journey Owner's Manual

Hide thumbs Also See for 2016 Journey:

Table of Contents

Rear Distance

Greater than

79 in (200 cm)

Audible Alert

Enabling And Disabling ParkSense

ParkSense can be enabled and disabled using the

Uconnect System. The available choices are: Off, Sound

Only, or Sound and Display. Refer to "Uconnect Settings"

in "Understanding Your Instrument Panel" for further

information.

When the ParkSense button is pushed to disable the

system, the EVIC will display the "PARK ASSIST SYS-

TEM OFF" message for approximately five seconds.

Refer to "Electronic Vehicle Information Center (EVIC)"

WARNING ALERTS

(200-100 cm)

(Continuous)

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247

in "Understanding Your Instrument Panel" for further

information. When the shift lever is moved to REVERSE

and the system is disabled, the EVIC will display the

"PARK ASSIST SYSTEM OFF" message for as long as the

vehicle is in REVERSE.

During vehicle start up, when the ParkSense Rear Park

Assist system has detected a fault condition, the Elec-

tronic Vehicle Information Center (EVIC) will actuate a

single chime, once per ignition cycle, and it will display

12 in (30 cm)

Table of Contents

Journey 2016