Dodge 2016 Journey Owner's Manual page 139

Making A Second Call While Current Call Is In
Progress
To make a second call while you are currently on a call,
push the Voice Command
"Call" followed by the phone number or phonebook
entry you wish to call. The first call will be on hold
while the second call is in progress. Or you can place
a call on hold by pressing the "Hold" button on the
touchscreen, then dial a number from the dialpad,
recent calls or from the phonebooks. To go back to the
first call, refer to "Toggling Between Calls" in this
section. To combine two calls, refer to "Join Calls" in
this section.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
push the Phone button until you hear a single beep,
indicating that the active and hold status of the two
calls have switched. Only one call can be placed on
button and say "Dial" or
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137
hold at a time. Also you can press the "Swap" button
on the touchscreen, on the Phone main screen.
Join Calls
When two calls are in progress (one active and one on
hold), press the "Join Calls" button on the Phone main
screen to combine all calls into a Conference Call.
Call Termination
To end a call in progress, momentarily press the "End"
button on the touchscreen or the Phone
the active call(s) will be terminated and if there is a call
on hold, it will become the new active call. If the active
call is terminated by the far end, a call on hold may not
become active automatically. This is cell phone-
dependent.
3
button. Only