Mechanical Adjustment - Sony VX-14MW1U Service Manual

4. MECHANICAL ADJUSTMENT

4-1. MECHANICAL ADJUSTMENT
When operational problems occur or the mechanism is reassembled, be sure to confirm the following
INSTRUCTIONS.
a. Make sure that the DATUM HOLE of the CAM GEAR is aligned with the DATUM HOLE in the
MAINBASE in the EJECT mode, as shown in Fig.4-1.
CAM GEAR
b. Make sure that part "A" of the RELAY LEVER, when assembled in the CONNECT PLATE, is fully rotated
to the left side of "B" of the MAINBASE, and is touching boss "C" of the MAINBASE as, shown in
Fig.4-2.
(See Fig.4-1~4-5)
DATUM HOLE OF CAM GEAR
F/L RACK
22
DATUM HOLE OF MAIN BASE