MINIMUM / MAXIMUM RECORDS
The
MEMORY
button is located in the main unit battery
compartment. Press
MEMORY
current, maximum (MAX) and minimum (MIN) records.
To clear the records, press and hold
seconds. A beep will sound to confirm that the memory
has been cleared.
MOON PHASE
The Calendar must be set for this feature to work, see
"Set Clock" section.
• Press
or
to view the moon phase for the next
or previous day.
• Press and hold
or
years (2001 to 2099).
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent
BACKLIGHT
Press LIGHT to activate the backlight for 8 seconds.
RESET SYSTEM
The RESET button is located in the main unit battery
compartment. Press RESET when you change the
batteries and whenever performance is not behaving
as expected (for example, unable to establish radio
frequency link with remote sensor or clock).
SAFETY AND CARE
Clean the product with a slightly damp cloth and
alcohol-free, mild detergent. Avoid dropping the
product or placing it in a high-traffic location.
BAR636_EN.p65
to toggle between
MEMORY
for 2
to scan quickly through the
7
7
WARNINGS
This product is designed to give you years of service if
handled properly. Oregon Scientific will not be
responsible for any deviations in the usage of the
device from those specified in the user instructions or
any unapproved alterations or repairs of the product.
Observe the following guidelines:
• Never immerse the product in water. This can cause
electrical shock and damage the product.
• Do not subject the main unit to extreme force, shock,
or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of dif-
ferent types.
• Do not use rechargeable batteries with this product.
• Remove the batteries if storing this product for a long
period of time.
• Do not scratch the LCD display.
NOTE The technical specification of this product and
contents of this user guide are subject to change
without notice. Images not drawn to scale.
TROUBLESHOOTING
PROBLEM SYMPTOM
Calendar
Strange date /
month
Clock
Cannot adjust
clock
Cannot auto-
synchronize the
date and time
Temp
Shows "LLL" or " Temperature is
HHH"
Remote
Cannot locate
sensor
remote sensor
Cannot change
channel
Data does not
match main unit
2005.2.22, 3:08 PM
REMEDY
Change language
Disable clock
1. Adjust batteries
2. Press RESET
3. Manually activate
clock feature
out-of-range
Check batteries
Check location
Check sensors.
Only one sensor is
working
Initiate a manual
sensor search