View Temperature And Humidity Area; Select Measurement Unit; Select Sensor Channel; Minimum / Maximum Records - Oregon Scientific BAR966HG User Manual

Data is collected and displayed approximately every
60 seconds.

VIEW TEMPERATURE AND HUMIDITY AREA

Press SEL to navigate to the Temperature and Humidity
Areas.
Temperature data is given at the top; Humidity is
below.

SELECT MEASUREMENT UNIT

Slide the °C / °F switch (inside the clock battery
compartment), to the setting you want.

SELECT SENSOR CHANNEL

Press CH to switch between sensors 1-5.
The house icon shows the selected remote sensor.
• To auto-scan between sensors, press and hold CH
for 2 seconds. Each sensor's data will be displayed
for 3 seconds.
• To end auto-scan, press CH or MEM with the
Temperature / Humidity Area selected.
NOTE If you select a sensor that collects only
temperature data, the humidity will not be shown.

MINIMUM / MAXIMUM RECORDS

• Press MEM repeatedly to view current, maximum and
minimum records for the selected sensor.
• To clear the records, press and hold MEM for 2
seconds. A beep will sound to confirm that the memory
has been cleared.

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the temperature and
humidity readings.
TREND
TEMPERATURE
HUMIDITY
24
RISING STEADY FALLING