Sony VPL-CX236 Operating Instructions Manual page 9

INPUT C/INPUT D
For connecting video equipment with an HDMI output connector.
Video equipment
Notes
• Use HDMI-compatible equipment and cable(s) that have an HDMI logo on them.
• The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal
or CEC (Consumer Electronics Control) Signal.
To attach the HDMI cable
Fix the cable to the cable tie holder at the bottom of the projector, using a commercially
available cable tie, as in the illustration.
Use a cable tie of less than 1.9 mm × 3.8 mm in thickness.
Cable tie holder
Cable tie
(commercially
available)
HDMI cable
HDMI output
(not supplied)
connector
Bottom of the projector
Connecting the Projector
9