Table of Contents
Advertisement
Security: Select the data privacy algorithm you want. Enabling the security can protect your data while it is
transferred from one station to another.
There are several security types to use:
WEP:
When you enable the 128 or 64 bit WEP key security, please select one WEP key to be used and input 26
or 10 hexadecimal (0, 1, 2...8, 9, A, B...F) digits.
802.1X
Check Box was used to switch the function of the 802.1X. When the 802.1X function is enabled, the
Wireless user must authenticate to this router first to use the Network service.
RADIUS Server
IP address or the 802.1X server's domain-name.
RADIUS Shared Key
Key value shared by the RADIUS server and this router. This key value is consistent with the key value in
the RADIUS server.
WPA-PSK
1. Select Encryption and Pre-share Key Mode
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2...8, 9, A, B...F) digits
If ASCII, the length of pre-share key is from 8 to 63.
2. Fill in the key, Ex 12345678
WPA
Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless
user must authenticate to this router first to use the Network service. RADIUS Server IP address or the
802.1X server's domain-name.
Select Encryption and RADIUS Shared Key
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2...8, 9, A, B...F) digits
If ASCII, the length of pre-share key is from 8 to 63.
Key value shared by the RADIUS server and this router. This key value is consistent with the key value in
the RADIUS server.
29
Advertisement
Table of Contents
