Setting The Dip Switches; Setting Procedure - Epson TM-U590 Technical Reference Manual

Setting the DIP Switches

On this printer, you can make various settings with DIP switches. The DIP switch functions
differ depending on the interface model.

Setting Procedure

Follow the steps below to change the DIP switch settings.
Before you remove the DIP switch cover, turn the printer off.
Otherwise, a short-circuit may cause the printer to malfunction.
CAUTION
DIP switch settings are enabled only when the power is turned on or the printer is reset via
the interface. If the settings are changed after that, the functions will not change.
1
Make sure the power supply for the printer is turned off.
2
Unscrew the screw to remove the DIP switch cover from the base of the
printer.
3
Set the DIP switches, using the tip of a tool, such as a small screwdriver.
4
Attach the DIP switch cover, and screw it in place.
26
DIP switch 1
DIP switch 2