Product Panels; Specifications - KTI Networks KGC-310 Installation Manual

1.2 Product Panels

The following figure illustrates the front panel and rear panel of the device:

1.3 Specifications

10/100/1000 Twisted-pair Copper Port (TP, RJ-45)
Compliance
Connectors
Pin assignments
Configuration
Transmission rate
Duplex support
Network cable
1000Mbps Fiber Port (FX, Mini-GBIC SFP)
Compliance
Connectors
Configuration
Transmission rate
Network cables
Eye safety
Loopback Test Push Button
LOOPBACK TEST
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
IEEE 802.3u 1000Base-T
Shielded RJ-45 jacks
Auto MDI/MDI-X detection
Auto-negotiation, manual settings or software control
10Mbps, 100Mbps, 1000Mbps
Full/Half duplex
Cat.5 UTP
IEEE 802.3z 1000Base-SX/LX (mini-GBIC)
SFP for optional SFP type fiber transceivers
Auto/Forced, 1000Mbps, Full duplex
1000Mbps
MMF 50/125 60/125, SMF 9/125
IEC 825 compliant
Push button to start loopback test
-8-