Network Stack Configuration - Asus Z10PA-U8/10G-2S User Manual

4.4.9

Network Stack Configuration

Allows you to configure the netword stack configuration.
Network stack [Disabled]
Enables or disables the network stack feature. Configuration options: [Disable] [Enable]
The following item appears only when Network stack is set to [Enabled].
Ipv4 PXE Support [Enabled]
Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will
not be created. Configuration options: [Disabled] [Enabled].
Ipv6 PXE Support [Enabled]
Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will
not be created. Configuration options: [Disabled] [Enabled].
PXE boot wait time [0]
Wait time to press ESC key to abort the PXE boot.
Media detect time [0]
Wait time (in seconds) to detect media.
4-20
Chapter 4: BIOS setup