Ngff) Connector (Ngff1); Power Supply Smbus Connector (5-Pin Psusmb1) - Asus Z10PA-U8/10G-2S User Manual

2. M.2 (NGFF) connector (NGFF1)
This connector allows you to install an M.2 device.
This connector supports type 2242 devices on the SATA interface.
The M.2 (NGFF) device is purchased separately
3.

Power Supply SMBus connector (5-pin PSUSMB1)

This connector allows you to connect SMBus (System Management Bus) to the PSU
(power supply unit) to read PSU information. Devices communicate with an SMBus
host and/or other SMBus devices using the SMBus interface.
This connector functions only when you install the ASUS ASMB8.
Power supply is required to meet PMBus specification and customized BMC FW may be
needed. Please contact ASUS if your need further support.
2-30
Chapter 2: Hardware information