Operating Instructions; Operating The Dishwasher - Viking 3 Series Use And Care Manual

Operating the Dishwasher

1. On/Off Button
2. Half Load Indicator LED
3. Salt Level Indicator LED
4. Start/Pause/Cancel Indicator LED
5. Start/Pause/Cancel Button
6. Time Delay Button
7. Time Delay Indicator LED
8. Rinse Level Indicator LED
9. Remaining Time Indicator/
Delay Time Indicator/Sanitized Indicator
• Open the door and load the dishwasher.
• Check that both upper and lower spray arms move freely.
• Pour correct amount of detergent into the detergent dispenser and close the lid.
• Push in the On/Off button 1 and check that the display lights come on.
• Check the rinse agent level indicator LED 8. If necessary, refi ll the rinse agent.
• Check the salt level indicator LED 3. If necessary, refi ll salt (select models).
• Use the Program Selection button 14 to choose your washing program.
• When there are few dishes, additionally use the Half Load function.
• Depending on the hardness level of the tap water, the Tablet
Detergent function allows better drying and washing performance from the multi-purpose tablets.
• Start the program with the Start/Pause/Cancel button 5.
• Close the door and the program will start.
• When the wash program has ended, an electronic beep will sound and will continue every 10 seconds. After two minutes of
elapsed time, the sound will stop. The beep can also be stopped by opening the door or by pressing the On/Off button 1.
• Press the On/Off button 1 and open the door after the program is completed. The indicator lights will go off .
• Allow your dishes to cool for 15 minutes, with the door open.
• Unload the dishes. Begin with the lower rack.
Floor Lighting Indicator
Your dishwasher will light the fl oor during the wash operation. The light will turn off automatically at the end of the washing
operation. NOTE: When the washing program begins, the light indicator feature activates itself automatically and will
automatically turn off at the end of the cycle. This feature is an option that cannot be turned off by the consumer.
Avoid opening the door during the wash cycle. This interrupts the washing
process, and hot steam will escape. Hot steam can cause burns and other
serious injuries. When the door is closed, the program will continue.
CAUTION
Hot steam can escape! Danger of serious burns or other injury.
CAUTION
10. Tablet Detergent Indicator
11. Program Indicator
12. Sanitization Indicator
13. Function Button
14. Program Selection Button
12
3 sec