System Settings (Settings For The Entire Rc-300); Adjusting The Display's Brightness (Lcd Contrast); Specifying The Operation Of The [Loop Fx] Pedal; Limiting The Phrase Memories That Can Be Switched - Boss RC-300 Owner's Manual

System Settings (Settings for the Entire RC-300)
Settings that are shared by the entire RC-300, such as those for the contrast of display and
the auto off function are called "system settings. "
First press the [SYSTEM] button.
For details, refer to "Basic Editing Procedure" (p. 9).
Parameter
Sys:LCD Contrast
Sys:LOOP FX Pdl
FX ON/OFF + ASGN
Sys:MemoryExtent
1 =>
Sys:Knob Mode
IMMEDIATE
32
Value

Adjusting the Display's Brightness (LCD Contrast)

8
In some locations where the RC-300 is set up, you may find that the display is difficult to read.
If this occurs, adjust the display's contrast.
1–16

Specifying the Operation of the [LOOP FX] Pedal

Here you can specify the operation of the [LOOP FX] pedal.
FX ON/OFF + ASGN
ASSIGN

Limiting the Phrase Memories That can be Switched

99

(Phrase Memory Extent)

By setting the upper and lower limits for the phrase memories the RC-300 can switch to, you'll more easily be able to
select the phrase memories you need.
Press [ ] /[ ] button to move the cursor, and turn the [MEMORY/VALUE] knob to set the upper and lower limits of
the range.
1–99

Setting the Knob/Slider Functions (Knob Mode)

This sets the way the values of settings are changed when the knobs/sliders are operated.
The Knob Mode setting works with respect to the RHYTHM [LEVEL] knob and TRACK [1]–[3] sliders.
Value
IMMEDIATE
MEMORY SETTING
KNOB POSITION
Explanation
Adjusts the contrast of the display in a range from 1 (lightest) to 16 (darkest).
Controls LOOP FX on/off and the Assign function (p. 23).
Controls only the Assign function (p. 23).
Upper and lower limits for phrase memories the RC-300 can switch to
Value when the phrase memory is loaded Value when a knob or slider is operated
Value specified by the phrase memory
Value specified by the phrase memory
Value of the knob or slider position
Value will change immediately
Value will start changing when the knob or
slider is moved to a position matching the
value in the phrase memory
Value will change immediately