Removal steps of LCD bezel assembly
Step
Screw cap
1
When installing: Ensure that all the latches are attached firmly. Then secure the bezel with the screws.
2020 LCD panel and hinges
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 56
•
"1020 Bottom cover" on page 57
•
"1040 Hard disk drive or solid-state drive" on page 59
•
"1050 PCI Express Mini Card for wireless LAN" on page 61
• "1060 PCI Express Half Mini Card for wireless WAN or mSATA solid-state drive" on page 63
•
"1080 Keyboard" on page 68
• "1090 Keyboard bezel assembly and power button sub card" on page 70
•
"1100 Thermal fan assembly " on page 73
•
"1110 Microprocessor" on page 75
•
"1120 System board assembly and VGA sub card" on page 76
• "1140 LCD unit, DC-in cable, and base cover assembly" on page 80
•
"2010 LCD bezel assembly" on page 85
86
Hardware Maintenance Manual
1
Screw (quantity)
M2.5 × 4.5 mm, flat-head, nylon-coated (4)
1
1
Color
Black
1
Torque
0.181 Nm
(1.85 kgfcm)