Off-Loading Data; Copying Files To Your Computer - Sony Odyssey7Q+ Setup Manual

Hide thumbs Also See for Odyssey7Q+:

OFF-LOADING DATA

1. CONNECT SSD DRIVE TO ADAPTER

Connect the Convergent Design 2.5" Premium SSD Media to any off-the-shelf 2.5" SATA

adaptor (example: Seagate GoFlex Thunderbolt Adaptor or USB 3.0 Adaptor)

2. CONNECT ADAPTER TO COMPUTER

The SSD will mount within 10-20 Seconds. (You will see this mount on the desktop or

within finder on MAC, or within My Computer on Windows machines).

3. COPY FILES FOR PLAYBACK/EDITING

All Clips or Takes are located within the "Clips" directory, navigate to this and copy all of

your files to a local or external drive or RAID for playback and/or editing.

SOFTWARE UTILITIES (FREE DOWNLOAD FROM WEBSITE)

CD CLIP MERGER (RAW/DPX)

Use the Clip Merger for any Raided Record (ie if your recorded clip required more than

one SSD). See the At A Glance Chart, "No. of SSD's Req" column, on page 2.

CD APPLE PRORESS TRANSFER TOOL

Use to combine clips into a single file

Use to copy all files to a single directory without folder structure.

Required in order to transfer markers to your NLE.

CD DATA UNPACKER (DPX)

Use CD Data Unpacker to convert "packed" files to "unpacked" data.

ALL UTILITIES CAN BE DOWNLOADED FROM THE FIRMWARE/DOWNLOADS

AREA OF OUR WEBSITE:

ATTENTION MAC OSX USERS

Before installing Convergent Design Software on Mac OSX You must first change the

following settings.

1) Navigate to Applications

2) Select Security and privacy

3) Under General

Allow applications downloaded from: Select Anywhere.

(FREE DOWNLOAD FROM

Convergent-Design.com/support/firmware-downloads.html

Utilities

System Preferences

WEBSITE)

Table of Contents