In-Door Ice Bin - Kenmore 795.7305 series Use & Care Manual

IN-DOOR iCE BiN
_, CAUTION
Keep hands and tools out of the ice compartment
door and dispenser chute. Damage or personal
injury may result.
The icemaker will stop producing ice when the ice
bin is full. If you need more ice, empty the ice bin
into the extra ice bin in the freezer compartment.
During use, the ice can become uneven causing the
icemaker to misread the amount of ice cubes and
stop producing ice. Shaking the ice bin to level the
ice within it can reduce this problem.
NOTE: Storing cans or other items in the ice bin will
damage the icemaker.
Keep the ice compartment door closed tightly. If the
ice compartment door is not closed tightly, the cold
air in the ice bin will freeze food in the refrigerator
compartment. This could also cause the icemaker to
not produce ice.
NOTE: If the On/Off switch on the icemaker is set to
Off (O) for an extended time, the ice compartment
will gradually warm up to the temperature of the
refrigerator compartment. To prevent ice cubes from
melting and leaking from the dispenser, ALWAYS
empty the ice bin when the icemaker is set to Off (O)
for more than a few hours.
_, CAUTION
When handling the
ice bin, keep hands
away from the blade
area to avoid
personal injury.
1. Pull or push the door handle to open or close the
Ice Compartment.
\__
20
2. To remove the in-door ice bin, grip the front
handle, slightly lift the lower part, and slowly pull
out the bin as shown.
3. To reinstall the in-door ice bin, slightly slant the bin
during replacement to avoid contact with the
icemaker.
4. Avoid touching the Ace-detecting sensor when
replacing the ice bin. See the label on the ice
compartment door for details.
.Q_ Ice-de e " g_l
sensor _S_#l
J _