Auger Motor Cover; How To Remove A Door Ice Bin; How To Insert A Door Ice Bin - Kenmore 795.78402.804 Service Manual

3-16 AUGER MOTOR COVER

1) After removing the icemaker remove the (5) stainless
screws holding the auger motor cover, shown in the
picutres below.
2) Grip the bottom of motor cover assembly and pull out it.
3) Disconnect wire harness of motor cover assembly.
There is a auger motor on the back, as shown in the
picture.

3-17 HOW TO REMOVE A DOOR ICE BIN

1) Grip the handles, as shown in the picture.
2) Lift the lower part slightly.
3) T ake the Ice Bin out slowly.

3-18 HOW TO INSERT A DOOR ICE BIN

1) Insert the Ice Bin, slightly tilting it to avoid touching the
Icemaker. (especially, ice maker lever)
Auger Motor
Insert the ice bucket carefully avoid contacing the
automatic shut off arm.
- 15 -
1
2