Hardware Monitor - Asus P5VDC-TVMTE Manual

2.4.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
Power
Q-Fan Control
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU Fan Speed
Chasis Fan Speed
CPU Fan Speed warning
Start Up Temperature(ºC)
Full Speed Temperature(ºC)
Start Up PWM
Slope PWM
F1:Help
ESC: Exit
Q-Fan Control [Enabled]
Allows you to enable or disable the CPU Q-Fan controller.
Configuration options: [Disabled] [Enabled]
The Q-Fan profile items appear when you enable the Q-Fan Control feature.
Vcore Voltage; 3.3V Voltage; 5V Voltage; 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
CPU Temperature; M/B Temperature
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. These items are not user-configurable.
CPU Fan Speed; Chasis Fan Speed
The onboard hardware monitor automatically detects and displays the CPU
and chassis fan speeds in rotations per minute (RPM). If any of the fans is not
connected to the motherboard, the field shows 0. These items are not user-
configurable.
2-22
Phoenix - AwardBIOS CMOS Setup Utility
Hardware Monitor
↑↓ : Select Item
→←: Select Menu
[Enabled]
[ 1.28V]
[ 3.20V]
[ 5.05V]
[ 11.64V]
89ºC
30ºC
4326 RPM
0 RPM
[800 RPM]
[50]
[70]
[70]
[4 PWM/(ºC)]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Press [Enter] to enable
or disable.
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS setup