Table of Contents
Advertisement
2.
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Space Bar). This feature requires
an ATX power supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
KBPWR1
1 2
2 3
+5V
+5VSB
(Default)
P5VDC-TVM TE Keyboard power setting
1-20
Chapter 1: Product introduction
Advertisement
Table of Contents
