Worksheet To Record System Information; Storage Center Information; Iscsi Fault Domain Information - Dell Storage Center SCv2000 Deployment Manual

Worksheet to Record System Information

Use the following worksheet to record the information that is needed to install the SCv2000/SCv2020
storage system.

Storage Center Information

Gather and record the following information about the Storage Center network and the administrator
user.
Table 6. Storage Center Network
Service Tag
Management IPv4 address (Storage Center management address)
Top Controller IPv4 address (Controller 1 MGMT port)
Bottom Controller IPv4 address (Controller 2 MGMT port)
Subnet mask
Gateway IPv4 address
Domain name
DNS server address
Secondary DNS server address
Table 7. Storage Center Administrator
Password for the default Storage Center "Admin" user
Email address of the default Storage Center "Admin" user

iSCSI Fault Domain Information

For a storage system with iSCSI front-end ports, gather and record network information for the iSCSI fault
domains. This information is needed to complete the Discover and Configure Uninitialized SCv2000
Series Storage Centers wizard.
NOTE: For a storage system deployed with two Ethernet switches, Dell recommends setting up
each fault domain on separate subnets.
Table 8. iSCSI Fault Domain 1
Target IPv4 address
Subnet mask
Gateway IPv4 address
IPv4 address for storage controller module 1: port 1
IPv4 address for storage controller module 2: port 1
78
________________
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
________________
___ . ___ . ___ . ___
___ . ___ . ___ . ___
________________
________________
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
Discover and Configure the Storage Center