Temporary User Overrides - Danfoss 102E5 Installation And User Manual

Temporary User Overrides

Sometimes you may need to change the way you use
your heating temporarily, i.e due to unusually cold
weather. The 102E5 has two convenient overrides which
can be selected without affecting the set programme.
Override
buttons
+1HOUR
 Press +1HOUR once if you need an extra hour of
operation (a red light will come on).
I f the system is off it will come on for an hour. If it is
already on it will add an extra hour so the system
stays on for an extra hour.
 To cancel the override press +1HOUR again (red light
will go off).
ADVANCE (does not work when unit set to OFF)
 Press the ADVANCE button once to advance to the
next programmed event (a red light will come on).
If the system is on it will go off. If it is off it will come
on. The set programme will resume at the next
programmed ON/OFF time
 To cancel the override press ADVANCE again (red
light will go off).
18