Setup Utility - Panasonic CF-71 Series Reference Manual

Setup Utility

Running the Setup Utility
To run the Setup Utility, you
need to restart your computer.
NOTE
Press F2 while [Press F2 to enter Setup] is displayed.
The Setup Utility will not run if F2 is not pressed soon after the computer starts.
In this case, you need to restart your computer.
If [Enter Password] is displayed, enter your password.
When entering the User Password, if the [Set User Password], [Set Supervisor
Password] and [User Password Protection] have been set, [Advanced] and [Secu-
rity] menus will not be displayed on the main screen.
To display the [Advanced] and [Security] menus:
1
Restart the computer and press F2 when [Press F2 to enter Setup] is displayed.
2
When [Enter Password] is displayed, enter the Supervisor Password.
For more details, on-line help is available; press
NOTE
Key Operations
F1
Enter
Esc
F5
F9 *
F10
* When starting up the Setup Utility with the User Password, this key is not available.
Closing the Setup Utility
Upon seeing
Press F2 to enter Setup
this message
F1 .
:
To display the corresponding "help" file.
:
To display sub-menu.
:
To display [Exit] menu.
:
To move among the menus.
:
, To move among the items.
:
F6 To move among the values.
:
To set default "Plug & Play" settings for the
operating system.
:
To save the settings and exit.
page 40
35
press F2