Using Usb Devices - Panasonic CF-71 Series Reference Manual

Using USB Devices

Installing USB Devices
1
Run the Setup Utility
2
Using and
3
Using and
Enter
4
Using and
5
Using and
6
Using and
7
Using and
8
Using and
9
Press F10 , then select [Yes]
10
Install the Windows 95 USB device drivers
1
In [Start] - [Run], input [c:\util\msupdate\usbsupp.exe]*, then press [OK].
At the confirmation message, press [Y es].
*
After reinstalling the hard disk, set the Windows 95 CD-ROM included in the Win-
dows 95 System Pack and input [L:\other\updates\usb\usbsupp.exe].
2
Read the [END-USER LICENSING AGREEMENT] and press [Yes] or [No].
• Installation will start if [Yes] is pressed.
• Installation will be aborted if [No] is pressed.
3
At the display indicating the completion of installation, press [OK]. The com-
puter will automatically restart.
4
In [Start] - [Run], input [c:\util\msupdate\usbcopy.bat], then press [OK].
5
Click at the upper right corner to close the display.
6
In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], select
[PCI Universal Serial Bus] in [Other devices], press [Remove], then press [OK].
7
Press [Refresh] and press [Close] at the [System Properties],
8
Restart the computer,
CAUTION
After a driver has been installed, do not use the suspend or hibernation func-
tion. If the suspend or hibernation mode is activated, the computer may not
function properly. Power off, then on, using the power switch to resume proper
operation.
If you want to use the suspend or hibernation function when the USB driver is
installed, disable the USB device function of the computer. (
( page 35)
, select [Power]
, select [Power Management] and press
, select [Disable] and press Enter
, select [Sleep Switch] and press Enter
, select [No Action] and press Enter
, select [Fn+F7/Fn+F10] and press Enter
, select [Disable] and press Enter
30
page 8)
(To next page)