(4. 1) 1 Pulse Width Trigger Sync-Reset Picture Output Timing - Toshiba IK-TF5P2 Instruction Manual

( 4 )
(4. 1)
Trigger* 1
(Internal VD)*
RGB data
(video interval image)
FVAL
LVAL,
DVAL
*1: External input signal
*2: Exposure time = Trigger pulse width + 6 μs
(Valid trigger pulse width is 2 μs or greater for external trigger shutter operation.)
this and output.
*4: When NR is set to ON, 1H is increased.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trigger, there
will be an effect on the video.
30
About 1 ms
Exposure completion
3
About 7 ms
Exposure period* 2
0 to 1H
* 4
20H (Partial scanning/binning OFF)
10H (Partial scanning 93fps)
12H (Partial scanning 121fps)
12H (Partial scanning 126fps)
14H (Partial scanning 174fps)
14H (Partial scanning 199fps)
15H (Partial scanning 250fps)
14H (binning)
Negative polarity mode
Positive polarity mode