Preparing The Scanner - Canon CanoScan 4400F Quick Start Manual

Preparing the Scanner
Preparing 'he Scanner
Unlocking the Scanner
1
Peel the seals off the scanner.
2
Slide the lock switch on the bottom of the scanner toward the unlock mark
(m).
A •
Do not tilt the
scanne~
more
th~n9()
degrees from hqr,izonta. I when releasing the
V •
Handlethescanner with both hands. Be careful not to drop thescanner.~.'
• Always lock the scanner when carrying or.transp<;>rting it. ....
•
Wh~n
locking:the
scann~r,
do not lift up the bcu*apd tilt the,fr9nl(scal1n¢r button
location} downward. You may be unabl!C to set the lock., ., .. .
A •
Only. use the USB cable and. the AS adapter providedwith the scanner, Use of other..·
V
cables or adapters may leadto a malfunctiol} .. . . .•
• When the scanner is connected to'the USB 1.1 port on Windows XP and
II
HI-SPEfDUSB'
Device Plugged into non,.HI-SPEED USB Hub" message appears; ignore theme~sag~. The
scanner operates in this condition without problems. .... . . . .
~
• The scanner does not have a power switch. The power.is activated as sooriasthe,;AC
adapter is plugged in.