Windows 2000 Or Xp Instructions; For The Router's Web-Based Utility; Figure E-4: Mac Address Filter List; Figure E-5: Mac Address Clone - Linksys WRT54GX User Manual

Wireless-G Broadband Router with SRX

Windows 2000 or XP Instructions

1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button.
2. At the command prompt, enter ipconfig /all. Then press the Enter key.
3. Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet
adapter. This appears as a series of numbers and letters.
The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.
Note: The MAC address is also called the Physical Address.
Another screen will show the Ethernet adapter's IP address. (Shown in the example as 192.168.1.100.) Your
computer may show something different.

For the Router's Web-based Utility

For MAC filtering, enter the 12-digit MAC address in this format, XXXXXXXXXXXX, WITHOUT the hyphens.
For MAC address cloning, enter the 12-digit MAC address in the MAC Address fields provided, two digits per field.
Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter
Windows 2000 or XP Instructions

Figure E-4: MAC Address Filter List

Figure E-5: MAC Address Clone

57