The Wireless Tab - Wireless Mac Filter; Figure 5-27: Wireless Tab - Wireless Mac Filter; Figure 5-28: Mac Address Filter List - Linksys WRT54G3G-VN User Manual

Wireless-G Router for Mobile Broadband

The Wireless Tab - Wireless MAC Filter

Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your
network's radius.
Wireless MAC Filter
Wireless MAC Filter. To filter wireless users by MAC Address, either permitting or blocking access, click Enable.
If you do not wish to filter users by MAC Address, select Disable.
Prevent. Clicking this button will block wireless access by MAC Address.

Figure 5-27: Wireless Tab - Wireless MAC Filter

Permit Only. Clicking this button will allow wireless access by MAC Address.
Edit MAC Address Filter List. Clicking this button will open the MAC Address Filter List. On this screen, you can
list users, by MAC Address, to whom you wish to provide or block access. For easy reference, click the Wireless
Client MAC List button to display a list of network users by MAC Address.
To save your list of MAC addresses, click the Save Settings button to apply your changes or Cancel Changes to
cancel your changes.
Change these settings as described here, and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.

Figure 5-28: MAC Address Filter List

Chapter 5: Configuring the Wireless-G Router for Mobile Broadband 31
The Wireless Tab - Wireless MAC Filter