Table of Contents
Advertisement
Wireless-G Router for Mobile Broadband
The Setup Tab - Basic Setup
The first screen that appears displays the Setup tab. This allows you to change the Router's general settings.
Change these settings as described here, and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.
Mobile Network Setup
Configure the mobile network settings for the Router in this section.
Mobile Connection. This button enables you to connect to and disconnect from the mobile network through the
Web-based Utility (you can also connect and disconnect using the hardware button on the Router). It will also
indicate the status of the Router's mobile broadband data card connection.
Status
Network Name. Displayed here is the name of the mobile network the Router is using.
Signal Strength. This indicates the strength of the mobile broadband signal that the Router is receiving.
Internet Setup
The Internet Setup section configures the Router to your Internet connection. Most of this information can be
obtained through your ISP.
Internet Connection Type
Figure 5-2: Setup Tab - Basic Setup
Choose the type of Internet connection your ISP provides from the drop-down menu.
• DHCP. By default, the Router's Internet Connection Type is set to Automatic Configuration - DHCP, which
should be kept only if your ISP supports DHCP or you are connecting through a dynamic IP address.
Figure 5-3: DHCP Connection Type
Chapter 5: Configuring the Wireless-G Router for Mobile Broadband
18
The Setup Tab - Basic Setup
Advertisement
Table of Contents
