Configuring Windows 2000 Pcs; Figure 5-3: Properties; Figure 5-4: Tcp/Ip; Figure 5-5: Ip Address - Linksys WRK54G (EU/LA) User Manual

Wireless-G Broadband Router

Configuring Windows 2000 PCs

1. Click the Start button. Select Settings and click the Control Panel icon. Double-click the Network and
Dial-up Connections icon.
2. Select the Local Area Connection icon for the applicable Ethernet adapter (usually it is the first Local Area
Connection listed). Double-click the Local Area Connection. Click the Properties button. (See Figure 5-3.)
3. Make sure the box next to Internet Protocol (TCP/IP) is checked. Highlight Internet Protocol (TCP/IP), and
click the Properties button. (See Figure 5-4.)
4. Select Obtain an IP address automatically. Once the new window appears, click the OK button. Click the
OK button again to complete the PC configuration. (See Figure 5-5.)
5. Restart your computer.
Go to "Chapter 6: Configuring the Wireless-G Broadband Router."
Chapter 5: Configuring the PCs
Configuring Windows 2000 PCs

Figure 5-3: Properties

Figure 5-4: TCP/IP

Figure 5-5: IP Address

11