Fuel Handling; Fuel Safety; Chain Oil - Husqvarna 395XP Quick Manual

Symbols
WARNING! Chain saws can be dangerous!
Careless or incorrect use can result in serious
or fatal injury to the operator or others.
Always wear:
• Approved protective helmet.
• Approved hearing protection.
• Protective goggles or a visor.
Switch off the engine by moving the stop
switch to the STOP position before carrying out
any checks or maintenance.
Always wear approved protective gloves.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged when the
chain saw is started.
WARNING! Kickback may occur when the nose
or tip of the guide bar touches an object, and
cause a lightning fast reverse reaction, kicking
the guide bar up and towards the operator. May
cause serious personal injury.
2 – English

FUEL HANDLING

Fuel safety

• Never refuel the machine while the engine is running.
• Make sure there is plenty of ventilation when refuelling
or mixing fuel (petrol and 2-stroke oil).
• Move the machine at least 3 m from the refuelling
point before starting it.
• Never start the machine:
1 If you have spilt fuel or chain oil on the machine. Wipe
off the spillage and allow remaining fuel to evaporate.
2 If you have spilt fuel on yourself or your clothes,
change your clothes. Wash any part of your body that
has come in contact with fuel. Use soap and water.
3 If the machine is leaking fuel. Check regularly for leaks
from the fuel cap and fuel lines.
WARNING! Never use a machine with visible dam-
age to the spark plug guard and ignition cable.
A risk of sparking arises, which can cause a fire.
Fuel
Note! The machine is equipped with a two-stroke engine
and must always be run using a mixture of petrol and
twostroke oil. Use Aspen fuel provided by Boels Rental.
WARNING! Always ensure there is adequate
ventilation when handling fuel.

Chain oil

• We recommend the use of special oil (chain oil) with
good adhesion characteristics.