Chapter 5: Configuring The Router; Overview - Linksys RT31P2-NA User Manual

Broadband router with 2 phone ports
Table of Contents

Advertisement

Broadband Router with 2 Phone Ports

Chapter 5: Configuring the Router

Overview

Linksys recommends using the Setup CD-ROM for first-time installation of the Router. If you do not wish to run
the Setup Wizard on the Setup CD-ROM, then you can use the Web-based Utility to configure the Router. For
advanced users, you may configure the Router's advanced settings through the Web-based Utility.
This chapter will describe each web page on the Utility and each page's key functions. The Utility can be
accessed via your web browser through use of a computer connected to the Router. For a basic network setup,
most users only have to use the following screens of the Utility:
• Basic Setup. On the Basic Setup screen, enter the Internet connection settings provided by your ISP. If you do
not have this information, you can call your ISP to request the settings. Once you have the setup information
for your specific type of Internet connection, then you can configure the Router.
• Management. Click the Administration tab and then the Management tab. The Router's default password is
admin. To secure the Router, change the Password from its default.
There are six main tabs: Setup, Security, Voice, Applications & Gaming, Administration, and Status. Additional
tabs will be available after you click one of the main tabs.
Setup
• Basic Setup. Enter the Internet connection and network settings on this screen.
• DDNS. Enable the Router's Dynamic Domain Name System (DDNS) feature on this screen.
• MAC Address Clone. If you need to clone a MAC address onto the Router, use this screen.
• Advanced Routing. On this screen, you can alter Network Address Translation (NAT), Dynamic Routing, and
Static Routing configurations.
Security
• Filter. To block specific users from Internet access, you can set up IP address, port, and MAC address filtering.
• VPN Passthrough. To enable or disable IPSec, PPPoE, and/or PPTP Passthrough, use this screen.
Chapter 5: Configuring the Router
Overview
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt31p2

Table of Contents