Linksys WUSB11 User Manual page 16

4. If you click on the New or Edit button, the screen in Figure 8-5 will
appear. You can enter a name for a new profile and change any of the set-
tings on this page.
Under the Network Type, you may choose either Infrastructure or Ad-Hoc.
Infrastructure mode allows a wireless adapter to communicate with a wired
network employing an access point, while the Ad-Hoc mode allows wire-
less-to-wireless, peer-to-peer communication. If you choose Infrastructure,
the SSID should have the same name as the Access Point. If you choose Ad-
Hoc, all clients should share the same SSID name. Click the Apply button
to save the settings or click on the Advanced button for your WEP encryp-
tion settings.
25
Instant Wireless
Figure 8-5
TM Series Wireless USB Network Adapter
5. If you clicked on the Advance button, the Advanced page will appear.
Under the WEP drop-down box, you can choose to have WEP encryption
Disabled, 64, or 128 Bits. If you choose 64 Bits, the screen in Figure 8-6
will appear. If you choose 128 Bits, the screen in Figure 8-7 will appear.
Figure 8-6
Figure 8-7
26