T - Con Board Removal - LG 42LH90 Manual

T - CON Board Removal
T - CON Board Removal
The two screws shown in the picture
below are for the Service Position.
They would have been removed
STEP (1)
when removing the shield.
Be sure to reinstall them if
Remove the 3 Screws in the T-CON
servicing the T-CON Board.
shield and remove the shield
CN5 CN4
Note: Chocolate
(Heat Sink
CN1 CN2
Material)
Disconnect CN1, CN2, CN4 and CN5.
STEP (2)
See next slide for details about removing cables.
22 February 2010 LCD DV 42LH90