Removing The T-Con Board - LG 42LH50 Training Manual

T - CON (TFT Drive) PWB Removal
T - CON (TFT Drive) PWB Removal
STEP (1)
Remove the 3 Screws in the T-CON
shield and remove the shield
The two screws shown in the picture
below are for the Service Position.
CN5
Disconnect CN1, CN2, CN4 and CN5.
STEP (2)
See next slide for details about removing cables.
38
They would have been removed
when removing the shield.
Be sure to reinstall them if
servicing the T-CON PWB.
CN1
2009 FALL LCD DV
CN4
CN2
42LH50