Linksys WMP110 User Manual page 8

Chapter3
3. On the Adapter's PIN number screen, click Next.
Enter the PIN Number
4. The Adapter connects to the network.
Connecting to the Network
5. Click Prnt to print out your wireless network settings.
Then click Fnsh to return to the Status screen, or click
Ext to exit the Monitor.
Congratulations
RangePlus Wreless PCI Adapter
Advanced Configuration
Congratulatons! The Adapter s connected to
the network.
Wireless Network Status
The Wireless Network Status screen provides information
on your current network settings.
Wireless Network Status
Rado Band This is the radio band used on the network.
Wreless Network Name This is the unique name (SSID)
of the wireless network.
Wreless Mode This is the mode of the wireless network
currently in use.
Wde Channel This is the Wireless-N primary channel
used with a 40 MHz radio band network.
Standard Channel
This is the channel used by your
wireless network.
Securty This is the status of the wireless security
feature.
Authentcaton This is
authentication method.
Network Type
This is the wireless network type.
IP Address
This is the IP Address of the Adapter.
Subnet Mask
This is the Adapter's Subnet Mask.
Default Gateway
This is the Default Gateway address.
DNS
This is the DNS address of the Adapter.
MAC Address
This is the MAC address of the wireless
network's wireless router or access point.
Sgnal Strength The Signal Strength bar indicates the
signal strength.
Lnk Qualty The Link Quality bar indicates the quality of
the wireless network connection.
Statstcs Click Statstcs to go to the Wireless Network
Statistics screen.
your wireless network's