Table of Contents
Advertisement
Chapter3
No Wi-Fi Protected Setup
If the router does not use Wi-Fi Protected Setup, proceed
to the appropriate section, "Wireless Security Disabled" or
"Wireless Security Enabled".
Wireless Security Disabled
If you connect to a network whose wireless security is
disabled, then you will view this screen:
Click Connect Anyway
1.
Click Connect Anyway.
2.
Click Fnsh.
Congratulations
Congratulatons! The Adapter s connected to
the network.
Wireless Security Enabled
If you connect to a network whose wireless security is
enabled, then you will view one of three screens.
1.
Proceed to the appropriate instructions.
WPA (W-F Protected Access )
If the network uses WPA2 Personal security, then
the WPA2-Personal Key Needed for Connection screen
appears.
RangePlus Wreless PCI Adapter
Advanced Configuration
WPA2-Personal Security
Passphrase
Enter the network's Passphrase (also
called a pre-shared key) of 8-63 characters.
To connect to the network, click Connect. To cancel
the connection, click Cancel.
WPA (W-F Protected Access)
If the network uses WPA Personal security, then
the WPA-Personal Key Needed for Connection screen
appears.
WPA-Personal Security
Passphrase
Enter the network's Passphrase (also
called a pre-shared key) of 8-63 characters.
To connect to the network, click Connect. To cancel
the connection, click Cancel.
WEP (Wred Equvalent Prvacy)
If the network uses WEP encryption, then the WEP Key
or Passphrase Needed for Connection screen appears.
3
Advertisement
Table of Contents
