Yamaha Reface CS Owner's Manual page 17

!0
!0 !0 !0
- 1 - 2 - 4
!0 !0
- 3 - 5
t-1. LOOPER slider
CLEAR Deletes recorded loop phrases.
When recording the first phrase:
Sets the Phrase Looper to Record-
ing Standby mode.
Recording will start as soon as you
play the keyboard with REC
selected.
REC
When recording the second and
subsequent phrases (overdub-
bing):
Recording will start as soon as you
move the slider to the REC posi-
tion.
Starts playback. When you switch
from REC to PLAY, recording stops
and playback of the recorded loop
phrase(s) starts. When you switch
PLAY from PAUSE to PLAY, loop play-
back will begin from the next beat.
When you switch from STOP to
PLAY, playback will begin from the
start of the loop.
When you switch from PLAY to
PAUSE PAUSE, loop playback will be
paused.
STOP Stops playback.
!1
q
!1 !1 !1
- 1 - 2
C5
Functions of Front Panel Components
t-2. [TEMPO] slider
For adjusting the tempo of loop playback.
When the slider is at the very bottom, the
tempo is 30 BPM; when at the very top, it is
300 BPM.
yLFO section
For adjusting the settings of the low fre-
- 3
quency oscillator (LFO).
y-1. [ASSIGN] slider
For selecting what to modulate with the LFO.
OSC
(Oscillator)
PITCH
FILTER
AMP
OFF
y-2. [DEPTH] slider
For adjusting the depth of the LFO (the
degree to which it has an effect).
y-3. [SPEED] slider
For changing the LFO's rate (or operating
frequency).
u[PORTAMENTO] slider
For setting the portamento time and the play-
ing mode of the entire instrument.
MONO
POLY
reface CS/DX/CP/YC Owner's Manual
Unique oscillator parameter
will be modulated. The actual
parameters modulated depend
on the OSC [TYPE] slider set-
ting.
The pitch of the oscillator will
be modulated.
The filter cutoff frequency will
be modulated.
The volume of the oscillator
will be modulated.
The LFO has no effect.
Sets the instrument to Mono-
phonic mode and adjusts the
portamento time.
Sets the instrument to Mono-
phonic mode.
Sets the instrument to Poly-
phonic mode. Portamento will
not be applied.
11