Remote Button Description - Sony HT-6500DP Operating Instructions Manual

Remote Button Description
(continued)
Remote
Operations Function
Button
CLEAR DVD player
SEARCH DVD player
MODE
Press if you made a
mistake when you press
the number button or
press to return to the
continuous play etc.
Select searching mode.
Press to select the unit for
search (track, index, etc.)
TOP MENU/ Satellite
Displays DVD title or
GUIDE
tuner/
guide menu.
DVD player
AV MENU VCR/Satellite Displays menu.
tuner/
DVD player
VCD player/ Returns to the previous
LD player/
menu or exits the menu.
DVD olaver
L i
2/+/4/+
VCR/Satellite Selects a menu item.
tuner/
DVD player
ENTER/ VCR/satellite Press to enter the
Press 1 (AVl) (or 2 (AV2)) while pressing
EXECUTE tuner/ selection.
down USE MODE.
DVD player
The indicator lights once (twice for
AV2)
, then
TV l/6 TV
Turns the TV on or off.
the command mode switches.
-I--
TV
Selects the channel
entry mode, either one
or two digit.
TV VOL TV
+I-
Adjust the volume of the
TV.
TV CH +I- TV
Select preset TV
channels.
TV/ TV
VIDEO
WIDE TV
Selects input signal: TV
input or video input.
Selects the wide picture
mode.
USE MODE Remote
To set up the
remote.
AV I and
Remote Select the command
AV2
mode of the remote.
Notes
l
Some functions explained in this section may not
work depending on the model of the receiver.
l
The above explanation is intended to serve as an
example only.
Therefore, depending on the component the above
operation may not be possible or may operate
differently than described.
l
The VIDEO 3, TV/SAT, PHONO, AUX, SOURCE,
MPXKKJAL, ANALOG DIRECT, 12 and ON
SCREEN functions are not available for set
operation.
Set the remote mode using the
USE MODE
button and the remote
mode buttons.
Selecting the command mode
You can switch the command
mode (AVl or
AV2) of
the remote.
If the
command mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.
To check the mode of the remote
Press USE MODE. You can check the remote
by the
indicator.
Mode
Indicator lights
AVI once
AV2
twice
To reset the remote to factory
settings
Press I/b, AV I/b, and MASTER VOL - at
the same time.
The indicator lights 3 times, then goes off.
ALT
Remote Change remote key
function to activate those
buttons with orange
printing.
4ou5